Spillerphoto Shop

DRE20 V2.0 – BOSS – RE-20 Space Echo Eurorack mounting frame kit with CV sync

The DRE20 V2 converts the BOSS – RE-20 Space Echo Twin Pedal into an Eurorack module. The DRE20 V2.0 contains 1 voltage controlled switche which controls the TAB / tempo. (Expression pedal CV function not implemented yet). The set includes an adjustable DC-DC step down converter.

The (almost) 6×12 AGFA ANSCO Plenax PD 16 camera DIY 3D print project

The Agfa Ansco Plenax PD 16 were are series of folding cameras for 116 film (PD16) format for 2½×4¼ inch negatives (nominally 6.5×11 cm) which was manufactured around 1935. With the 6×12 AGFA ANSCO Plenax PD 16 camera DIY 3D print project, the camera is able to take high quality captures due to the fantastic […]

9V and USB power converters for Eurorack

12V and 9V Eurorack Power Converters As addition to the DSQ-1 and DR20 the two power converters connect the devices to the 12V Eurorack power supply. It abolishes batteries or external power supplies which are usually used to power the devices. Easy Connection USB power converter Just connect the Eurorack connector to the Eurorack power […]

DRE20 – BOSS – RE-20 Space Echo Eurorack mounting frame kit

The DRE20 converts the BOSS – RE-20 Space Echo Twin Pedal into an Eurorack module. The set includes an adjustable DC-DC step down converter. Additional Parts While all required screws can be re-used from the Boss Re-20, following additional parts are required: 5 pcs. 3.5 mm Eurorack Jacks PJ301CM Stereo https://www.thonk.co.uk/shop/3-5mm-jacks/ Wire to connect the jacks with […]

DSQ-1 WHITE Edition and WHITE Knobs Mod for Korg SQ-1

The DSQ-1 Eurorack mounting frame with white lettering and white 18 KNOBS upgrade. The new knobs are bigger than the original knobs and made out of white PLA. Due to the increased size and improved profile, they provide a better handling than the small original knobs. The center of the knobs is hollow which allows […]

WHITE Knobs Mod for Korg SQ-1

The new white knobs are bigger than the original knobs and made out of white PLA. Due to the increased size and improved profile, they provide a better handling than the small original knobs. The center of the knobs is hollow which allows the red light of the step sequencer to shine through. DSQ-1 and […]

BLACK Knobs Mod for Korg SQ-1

The new black knobs for the Korg SQ-1 are bigger than the original knobs and made out of black PLA. Due to the increased size and improved profile, they provide a better handling than the small original knobs. The center of the knobs is hollow which allows the red light of the step sequencer to […]

DSQ-1 PLUS – Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space

The DSQ-1+ is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers bigger lettering, the DSQ-1+ uses this area to provide space for a 4HP Eurorack Module.   For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required. […]

DSQ-1 – Korg SQ-1 Sequencer Eurorack Mounting Frame

The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer.  For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required. Easy assembly Remove the batteries Loosen the thin plastic film on one side which is holding the battery holder in place […]

DCAPS for Behringer Model-D and Neutron on Thingiverse

DCAPS for Behringer Model D and Neutron

Showing 1–18 of 45 results

Showing 1–18 of 45 results