Loading file

SP1Cap25 – 25 HP front cap (STL File Download)

0.99 $

3D printed 25 HP front cap  for the modular Eurorack case SP1.

Description

(Last Updated On: 23/10/2019)

50.8 mm front cover with a horizontal pitch of 25 HP (1 HP=5.08 mm). The cap can be combined by assembling the caps with threaded strips. The threaded strips are available in the onlineshop or can be directly orderer under https://gie-tec.de/product/threaded-strips/?lang=en

Item Description:

One 3D printed 25 HP front cap 

Material: Prusament PLA Galaxy Black

Print Time: Approx. 4 hours

Weight: 80 g

About The SP1 Eurorack Modular Case

Why to be limited to modules when it comes to a modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup up to the fully fledged modular home system…or even combine a stationary system with a mobile system. The SP1 can be extended vertical as well as horizontal.

Features of the SP1 – Modular Eurorack Case

  • Flexible modular case design
  • Horizontal Extendable
  • Vertical Extendable
  • Build in cable shaft on the back (shaft is accessible with the modules SP1H10CC or SP1 H10DCC)
  • Light Weight
  • Good Cost/Performance Ratio
  • Horizontal or angled desktop position*

Current available case modules:

  • SP1H10 – Standard 10 HP 3U Eurorack Module
  • SP1H35 – Standard 35 HP 3U Eurorack Module (only STL file download available)
  • SP1H10VC – Standard 10 HP 3U Eurorack Module with vertical connection and cable holes
  • SP1H10RC – 10 HP 3U Eurorack Module with right cover
  • SP1H10LC – 10 HP 3U Eurorack Module with left cover
  • SP1H25GM – 25 HP 3 U Eurorack Module with Grip
  • SP1H10CC – Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft
  • SP1H10DCC – Standard 10 HP 3U Eurorack Module with double cable opening
  • SP1Cap10 – 10 HP front cap
  • SP1Cap25 – 25 HP front cap
  • SP1CapRC – 10 HP front cap with right cover
  • SP1CapLC – 10 HP front cap with left cover

Current planned case modules:

  • SP1SQ1 – Eurorack Module for Korg™ SQ1
  • Sp1TEO – Eurorack Module for Teenage Engineering™ Operator Series
  • SP1H10FL – Standard 10 HP 3U Eurorack Module with flat back for horizontal positioning
  • SP1H10VCFL – Standard 10 HP 3U Eurorack Module with vertical connection and cable holes with flat back for horizontal positioning
  • SP1H10RCFL – 10 HP 3U Eurorack Module with right cover with flat back for horizontal positioning
  • SP1H10LCFL – 10 HP 3U Eurorack Module with left cover with flat back for horizontal positioning
  • SP1H10CCFL – Standard 10 HP 3U Eurorack Module with cable opening into the cable shaft with flat back for horizontal positioning
  • SP1H10DCCFL – Standard 10 HP 3U Eurorack Module with double cable opening with flat back for horizontal positioning

The modules are 3D printed with high quality PLA filament from Prusa or Colorfabb. Other colours possible on special request.

*desktop position for one horizontal row systems only

Additional information

Weight100 g

Reviews

There are no reviews yet.

Be the first to review “SP1Cap25 – 25 HP front cap (STL File Download)”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.