I finished another Jasper Synth (EDP WASP clone). For this Jasper I’m using a slightly re-designed 3D printed case which fits into a desktop stand. For the first time I’m using PETG instead of PLA for the case. PETG is a bit more flexible and not as brittle like PLA printed items. (link: PLA vs PETG) The Japser comes with MIDI IN and OUT and the switch for 2 different “hold” functions.
The Jasper enclosure is 3D printed (glued together) and consists out of the Jasper enclosure and a desktop stand with a wooden element. The Jasper is ready and fully functional but I’m currently waiting for a shipment of screws to finalise the assembly of the casing. The wood on the photo will get a finish with hard oil wax.
- 2 x DCO (32′, 16′, 8′, 4′, 2′) with saw, enhanced, pulse (DCO 1 variable pulse width)
- Mix level control for each DCO
- 2 x ADS EG (1xVCA + 1xVCF), both with repeat function
- 1 x Noise Generator
- 1 x VCF with Lowpass, Bandpass, High and Notch
- 1 x LFO (about 0.55Hz to 100Hz) with saw, square, sine, random and noise Filter is resonant (but not self-oscillating)
- Hold Function
- Glide Bend
- External audio input (DCO independent)
- Midi in/out
- DCO 2 pitch
- Tune Two octave capacitative touch “keyboard”
- Headphone and line outs
- ‘Link’ port to connect to other Jaspers (Wasps, Gnats or Spiders)
- External envelope trigger input
The Jasper Synth is a DIY project. PCB are available from the UK. The Synth comes with the build-in Midi kit.
3D printed with PETG Prusament black.
I uploaded a demo of the synthesiser on youtube. It’s exactly the offered synthesizer but the video is showing a pre-version of the final casing.