Posted on Leave a comment

DSQ-1 PLUS – Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space

Korg SQ-1 Knob Mod - White Edition(Last Updated On: 07/12/2018)

The DSQ-1+ is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers bigger lettering, the DSQ-1+ uses this area to provide space for a 4HP Eurorack Module.  

For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.

Easy assembly

  1. Remove the batteries
  2. Loosen the thin plastic film on one side which is holding the battery holder in place
  3. Unscrew the 4 front screws
  4. Remove the back and pull the battery holder through the back, that the back can be put aside
  5. Slide the mounting frame in 
  6. Use the 4 screws from the front to fix the mounting frame

Powering the SQ-1 can either be done by batteries, via USB with an angled USB cable or with the 12V to USB power converter.

Leave a Reply

Your e-mail address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.