• Your cart is empty
  • Face and Places - Downtown Doha
    Face and Place...
    People and streets...
    By Torsten Spiller
    Photo book
  • Enter your email address to subscribe to this blog and receive notifications of new posts by email.

    DSQ-1 PLUS – Korg SQ-1 Sequencer Eurorack Mounting Frame with 4 HP Module space

    DSQ1+ - Korg SQ-1 sequencer Eurorack mounting frame
    (Last Updated On: 25/09/2018)

    The DSQ-1+ is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. While the DSQ-1 mounting frame offers bigger lettering, the DSQ-1+ uses this area to provide space for a 4HP Eurorack Module.  The frame can be ordered via below PayPal links.

    For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.

    Easy assembly

    1. Remove the batteries
    2. Loosen the thin plastic film on one side which is holding the battery holder in place
    3. Unscrew the 4 front screws
    4. Remove the back and pull the battery holder through the back, that the back can be put aside
    5. Slide the mounting frame in 
    6. Use the 4 screws from the front to fix the mounting frame

    Powering the SQ-1 can either be done by batteries or via USB with an angled USB cable.


    Order the DSQ-1 PLUS –  Eurorack Mounting Frame for the Korg SQ-1 Sequencer:

    1 pcs. 3D printed mounting frame made from black colorfabb PLA + 1  blending panel. (screws, nuts and battery holder are not included) Available colors: black, white or red

    Price: 29 $ (incl. worldwide shipping)

    Black Version (with silver lettering)

    White Version (with black lettering)

    Red Version (with black lettering)

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    error: Content is protected !!
    %d bloggers like this: