• Your cart is empty
  • Face and Places - Downtown Doha
    Face and Place...
    People and streets...
    By Torsten Spiller
    Photo book
  • Enter your email address to subscribe to this blog and receive notifications of new posts by email.

    DRE20 – BOSS – RE-20 Space Echo Eurorack mounting frame kit

    DRE20 - Eurorack Mount for RE-20 Roland Space Echo RE-201
    (Last Updated On: 08/11/2018)

    The DRE20 converts theĀ BOSS – RE-20 Space Echo Twin Pedal into an Eurorack module. The set includes an adjustable DC-DC step down converter.

    Additional Parts

    While all required screws can be re-used from the Boss Re-20, following additional parts are required:

    6 pcs. 3.5 mm Eurorack Jacks PJ301CM Stereo https://www.thonk.co.uk/shop/3-5mm-jacks/

    Wire to connect the jacks with the PCB https://www.rapidonline.com/catalogue/search?Query=Wire%207%2F0.2


    Step 1

    Disassemble the Boss RE-20 Space Echo and remove carefully the glued metal sticker in the center of the device. Disconnect the two ribbon cables of the PCBs since the front PCB needs to be trimmed that it fits into the Eurorack.

    Step 2

    Cut small strips with the hand saw from the front PCB (the PCB which contains the potentiometers and LEDs) that it fits later into the Eurorack. 

    Step 3

    Unsolder all jacks and solder cables to connect the Eurorack jacks to the PCB. Solder the Eurojacks to the cables and screw the spacers with existing screws from the Boss RE-20 onto the back of the front PCB.

    Step 4

    Screw the Boss RE-20 aluminium panel with the 3D printed front panel with two of the Boss RE-20 aluminium panel screws together. Widen the holes for the screw on the top of the aluminium panels with a drilling machine (or similar) until the two holes of the aluminium panel align with the threads of the Eurorack.

    Step 5

    Align the 3D printed buttons on the 2 switches of the RE-20 PCB and screw PCB with 4 of the existing screws (from the Boss RE-20) on the back of the 3D printed front panel 

    Step 6

    Align the cables between the two PCBs, connect the two ribbon cables and screw the PCB onto the spacers between.

    Power Supply

    For the power supply, either the original power supply can be used or the included power converter which converts the 12V of the Eurorack into the required 9V for the Boss RE-20. Cable to connect the converter to the Eurorack power supply and to the DRE-20 are not included in the set.

    Order the DRE20 – Boss RE-20 Space Echo Eurorack Mounting Kit

    • Front plate (3d printed PLA part)
    • 2 buttonsĀ (3d printed PLA part)
    • 2 spacers (3d printed PLA part)
    • Adjustable DC-DC step down converter 5V-23V to 3.3V 5V 9V 12V 3A

    Price: 29 $ (incl. worldwide shipping)

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    error: Content is protected !!
    %d bloggers like this: